DN1 Degreaser is a custom formulated degreaser specifically developed to clean surfaces before impression taking. It’s a product made for removing the most stubborn oil and grease residues.
Its innovative formula acts swiftly on surfaces, ensuring a spotless clean without leaving any traces or residues behind.
The DN1 Degreaser had been developed to be fully compatible with Plastiform products, ensuring an optimal cleaning experience before every plastiform impressions. It guarantees no residues will perturb the accuracy of the replica.
It is Available in a handy 400mL aerosol for quick applications or in 1L cans for larger tasks.
As it is validated for Plastiform use, it improves the impression taking process and guarantees high accuracy replicas by removing any pollutant on the surface.
The DN1 Degreaser must be used before any application, but especially for :
Dimensional control & Roughness control: It ensures a good polymerization and a better accuracy by removing contaminants between the product and the surface.
To achieve optimal results, the DN1 is mandatory before any impression taking.
For best practice, it is recommended to degrease the part thoroughly and wait for the degreaser to completely evaporate before using a Plastiform product on the surface.
These instructions are applicable to all Plastiform products within the range.
Looking for a complete kit to try plastiform?
The case contains all required accessories to use Plastiform. It is the best way to try our solutions for the first time!
DN1 is always sold with nozzles and tips. The Dispensing gun is NOT included in any of these sets:
AC-019
1x 400ml DN1
16,10 €Excl. tax
AC-019-12
12x 400ml DN1
189,75 €Excl. tax
AC-019-C
1x 1L Can
17,25 €Excl. tax
Buy now
400ml Aerosol
16,10 €
Frequently Asked Questions
How to clean the injection material after taking the impression ?
You don't need to clean the material. The nozzle is going to trash and the tip is reusable after extracting the polymerized material inside it.
Where can I download Safety Data Sheets for this products ?
All the MSDS are available on the product dedicated page, just bellow the gallery of picture. You can also find them on the dedicated page.
Which product should I use to control dimensions of my part?
Every application and every part are different. This is why we developed the Plastiform Finder, which can help you find the right product after asking you some questions about the context. Use it or contact us to find the best product !
Are there any materials to which plastiforms cannot be applied?
It is possible to apply our products to any type of material and its alloys (including gold, silver, titanium). They can also be used on plastic materials, wood, resins, etc. However, certain silicone-based materials should be avoided, as they can sometimes alter the polymerization of the products. We always recommend a test before use.
Are all products compatible with the Double Blade Cutter ?
No. The double blade cutter can only cut semi-flexible impressions. You can check on the label and the technical sheet if the product you are interest in is usable with the Cutter.
Related Products
Considered the DN1 for your application but it doesn’t exactly answers to your requirements? You may also find these alternative products helpful.
AC-019
AC-019-12
AC-019-C
