Description

F65 is a product with low fluidity, which allows you to pour it into poorly positioned parts. The final impression is Semi-Flexible (hardness 65 Shore A), and inelastic. It can hardly be deformed when demoulded, and should therefore not be used in complex shapes.

The impression of this plastiform only accepts a 5% Extraction Stress. The F65 is specifically designed to create custom savings, plugs or masking joints. It is a very good product to use to protect certain parts of a part during surface treatment:

  • Sandblasting, shot blasting,
  • Chemical treatment,
  • Heat treatment,
  • Polishing,
  • Anodizing,
  • Chrome plating.

It is possible to cut the F65 with the Double Blade Cutter to obtain cross sections of your replicas and study them more easily.

f65 curing time chart

f65 ca-f65-2 ca-f65-8 ca-f65-16 PEAD P.E.A.D

Product Initial consistency Final consistency Final hardness Maximum extraction constraint Working time at 20°c Setting time at 20°c Accuracy Double Blade Cutter Caliber
F65 Fluid Flexible 65 5% +/- +/- 6 min +/- µm Yes No

Applications

The F65 is suitable for the following applications:

It can also be used for:

  • Mechanical reinforcement of a part before machining.

It is easy to use the F65 by following the guidelines available in the user manual. It is a much less fluid product than the other products in the range, so be careful if you choose not to use the tip.

It is important to always use the DN1 to degrease your parts before starting the impression. This indication applies to all plastiform products.

Impression Measurement

As the F65 impression is semi-flexible, it can be controlled without contact using visual measuring systems:

  • Profile projector,
  • Microscope,
  • Optical measuring system.

It can also be controlled with a contact measuring system for flexible materials (caliper with constant measuring pressure). However, we recommend that you always use a visual inspection system to obtain accurate values…

F65 Plastiform internal control of dimensions
F65 Imprint without removal constraint
F65 plastiform replica
Plastiform Online Video

Click to watch the video

Packaging :

Each product is delivered in 50mL cartridges, with standard injectors and nozzles.

References :

CA-F65-2 : 2 cartridges 50ml + 12 standard nozzles + 6 tips

CA-F65-8 : 8 cartridges 50ml + 48 standard nozzles + 6 tips

CA-F65-16 : 16 cartridges 50ml + 48 standard nozzles + 6 tips

Start your trial now

With the Plastiform Case, you will get every accessories required for creating 3D impressions and exploit them. Customise your case or opt for our already referenced solutions available on the website of our official distributors.

Plastiform Case
< Go Back
Go to Top